Send the faulty drive
Message us the model number, motor rating, or just a photo of the nameplate. That is all we need to start.
Faulty, tripping or end-of-life drive? Send us the model, motor rating or a photo — we cross-reference any brand and match a Himel or Schneider Electric replacement from local stock, same business day.
No forms, no waiting on a call-back. WhatsApp us the drive — we do the cross-reference.
Message us the model number, motor rating, or just a photo of the nameplate. That is all we need to start.
We match motor kW, voltage, phase, full-load current and control mode to the right Himel or Schneider replacement.
In local stock? It leaves same business day — with installation, testing & commissioning available if you need it.
If your drive shows any of these, send it to us before it strands your plant. Most are end-of-life signs, not a quick reset.
Repeated DC-bus voltage trips on decel or a fluctuating supply — often ageing capacitors or a failing brake circuit.
Nuisance overcurrent or output short-circuit trips on start typically point to IGBT or output-stage degradation.
Heatsink over-temperature alarms and noisy or stalled cooling fans — a leading end-of-life failure in hot plant rooms.
The drive trips under normal load it once handled — capacitor ESR rise and derating as the unit ages.
Persistent earth-fault trips can indicate insulation breakdown in the drive output stage — a replace, not repair, signal.
Discontinued model, no firmware or boards available, or a 10+ year old drive on borrowed time — plan the swap now.
Electrolytic DC-bus capacitors typically last 7–10 years. Once a drive is past that, trips get more frequent and downtime becomes unplanned. A same-day replacement beats an emergency shutdown — send us the fault code →
Your existing drive doesn't have to match ours. We cross-reference the electrical specification — not the label — and supply a compatible Himel or Schneider Electric unit that drops into your panel and controls the same motor.
A drive replacement is also the moment to upgrade. Retrofitting a modern VSD onto a fixed-speed pump or fan cuts energy on part-load — a recognised BCA Green Mark efficiency measure.
Fan and pump power follows the cube of speed — trimming speed to demand delivers large kWh savings versus throttling a fixed-speed motor.
VSD retrofits on ACMV, AHU and chilled-water pumps support energy-efficiency credits in Green Mark and existing-building upgrades.
Replacing a soft starter with a VSD adds full-range speed control, energy saving and smoother mechanical life — not just a softer start.
New drives add richer protection, diagnostics and Modbus / BACnet integration — easier to monitor and safer for your motor.
Estate booster-pump and ventilation drives fail — and residents feel it fast. We supply compact, quiet-running replacement VSDs for HDB and residential systems from local stock, with fast turnaround and full installation, testing & commissioning where the site needs it.
Part of a track record that includes Sentosa Monorail Depot, Suntec City Mall, Microsoft Data Centre, One Marina Office Tower, Punggol Regional Sports Centre and HDB residential projects.
WHATSAPP JASON FOR HDB REPLACEMENTYes. We cross-reference any brand of variable speed drive or soft starter — ABB, Danfoss, Yaskawa, Mitsubishi, INVT, Vacon, Powtran, Delta, Siemens and others — and match a compatible Himel or Schneider Electric replacement by motor kW, supply voltage, phase, full-load current and control mode. Send the faulty model number or a photo of the nameplate on WhatsApp and we'll confirm the right replacement.
We hold local Singapore stock across common ratings, so most standard replacements ship the same business day once the specification is confirmed. Send your faulty model, motor rating or a photo for an immediate stock check.
Yes. We supply and replace drives for HDB booster-pump and ventilation systems with compact, quiet-running units, fast local delivery, and full installation, testing & commissioning where required.
The motor power (kW or HP), supply voltage (230V / 400V / 690V), phase (single or three), full-load current in amps, and the application. A clear photo of the faulty drive's nameplate covers almost all of it — we handle the cross-reference.
If a drive is 7–10+ years old, tripping repeatedly, or the model is discontinued with no spare boards, replacement is usually more reliable and cost-effective than a repair that leaves the rest of the unit on borrowed time. Send us the model and fault code and we'll give you a straight recommendation.
Send us the faulty model, motor rating or a photo of the nameplate — we'll match a Himel or Schneider replacement from local stock, same business day.
